Study The Effect of Doping Zinc Oxide Thin Films With (0.5 wt. %) Carbon Nanotubes by Vacuum Evaporation
Main Article Content
Abstract
The study included the production of nano-thin films made of zinc oxide doped with carbon nanotubes (ZnO:CNTs) at a doping ratio of 0.5 wt%. The materials are applied onto glass substrates using the vacuum evaporation process. The structural characteristics of the thin films of undiluted and doped ZnO were assessed using X-ray diffraction (XRD). Additionally, the surface properties of the films were examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The optical characteristics of the thin films were analyzed and described using UV-Vis spectroscopy. The ZnO thin films exhibited crystalline formations. The thin films exhibited significant orientations along the (100), (002), and (101) crystallographic planes, indicating their hexagonal phase structures. The crystal size of ZnO thin films exhibited a range of 30.87 nm to 19.96 nm after the process of doping. The study findings demonstrate that the addition of carbon nanotubes leads to an increase in the absorption ratio. Zinc-doped carbon nanotube thin films has features that make them suitable for many applications, such as gas detectors and UV detectors.
Article Details

This work is licensed under a Creative Commons Attribution 4.0 International License.
Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.
References
[1] Macleod, H.A. (2010). Thin Film Optical Filters, 4th edn., Tucson, Arizona, USA: CRC Press:791pp. https://doi.org/10.1016/B0-12-369395-0/00880-0
[2] Ibrahim, A.M.; Isma’el, R.A.; Ibrahim, E.S. and Ibrahim, E.M. (2017). Study the structural and Optical properties of ZnO thin film. Tikrit Journal of Pure Science, 28 (6): 66-75. https://doi.org/10.25130/tjps.v22i1.618
[3] Dahham, A.R.; Mohammed, S.J. and Mohammed, W.M. (2019). Study of the optical and structural properties of the (ZnO) membrane, which is prepared by the method of thermal steaming by using the closed oven. Tikrit Journal of Pure Science 24(2):56–62. https://doi.org/10.25130/tjps.v24i2.353 .
3.003.053.103.153.203.253.303.353.403.453.500.00000.00050.00100.00150.00200.00253.003.053.103.153.203.253.303.353.403.453.500.0000.00050.00100.0015 ZnO:0.5CNTs(αhν)2
(
cm-2(ev)2)E (ev) ZnO(αhν)2
(
cm-2(ev)2)
[4] Soonmin, H.; Vanalakar, S.A.; Galal, A. and Singh, V.N. (2018). A review of nanostructured thin films for gas sensing and corrosion protection. Mediterranean Journal of Chemistry, 7(6):433-451. http://dx.doi.org/10.13171/mjc7618111916hs .
[5] Sood, A.K.; Wang, Z.L.; Polla, D.L.; Dhar, N.K.; Manzur, T. and Anwar, A.F.M. (2011). ZnO Nanostructures for Optoelectronic Applications. In: Sergiyenko, O. (eds.), Optoelectronic Devices and Properties. InTech, Georgia, U.S.A.: p. 173–196. https://doi.org/10.5772/16202 .
[6] LITTON, C.W.; REYNOLDS, D.C. and COLLINS, T.C. (eds). (2011). Zinc Oxide Materials for Electronic and Optoelectronic Device Applications. 1st edn., John Wiley and Sons Ltd: 379pp. DOI:10.1002/9781119991038.
[7] Suman,; Ankita,; Chahal, S.; Kumar, S.; Kumar, A.; Duhan, S. and Kumar, P. (2023). Magnetism in zinc oxide (ZnO). In: Kumar, P.; Singh, J.P.; Kumar, V. (eds), Defect-Induced Magnetism in Oxide Semiconductors. Woodhead Publishing is an imprint of Elsevier: pp 547–561. https://doi.org/10.1016/C2020-0-03503-6
[8] Nickel, N.H. and Terukov, E. (eds). (2005). Zinc Oxide-A Material for Micro- and Optoelectronic Applications. Netherlands, Springer:245pp. https://doi.org/10.1007/1-4020-3475-X.
[9] Nguyen, T.; Adjeroud, N.; Guennou, M. et al. (2020). Controlling electrical and optical properties of zinc oxide thin films grown by thermal atomic layer deposition with oxygen gas. Results Mater, 6:1–14. https://doi.org/10.1016/j.rinma.2020.100088 .
[10] Faramawy, A.; Elsayed, H.; Scian, C. and Mattei, G. (2022). Structural, Optical, Magnetic and Electrical Properties of Sputtered ZnO and ZnO:Fe Thin Films: The Role of Deposition Power. Ceramics, 5:1128–1153. https://doi.org/10.3390/ceramics5040080 .
[11] Ziat, Y.; Hammi, M.; Belkhanchi, H. and Ifguis, O. (2022). CNTs modified ZnO and TiO 2 thin films : The effect of loading rate on band offset at metal / semiconductor interfaces. E3S Web of Conferences, 337:1–12. https://doi.org/10.1051/e3sconf/202233705003 .
[12] Hussain, A.A. and Abdullah, Q.N. (2023). Studying the Structural, Optical and Electrical Properties of ZnO: SnO2 Thin Films as an Application of a Gas Sensor Using Vacuum Thermal Evaporation Technique. Tikrit Journal of Pure Science 28(6):66–75. https://doi.org/10.25130/tjps.v28i6.1379 .
[13] Jasim, A.S.; Mohammed, K.I. and Rashid, S.N. (2016). Effect of annealing by CO2 laser on Structural and optical properties of zinc oxide thin films prepared by Sol – gel method. Tikrit Journal of Pure Science 21(4):112–121. https://doi.org/10.25130/tjps.v21i4.1062
[14] Vyas, R.; Sharma, S.; Gupta, P.; Sachdev, K. and Sharma, S.K. (2013). SYNTHESIS AND HYDROGEN SENSING PROPERTIES OF CNT-ZnO NANOCOMPOSITE THIN FILMS. International Journal of Modern Physics: Conference Series, 22:478–482. https://doi.org/10.1142/S2010194513010544
[15] Vaitkus, A.; Merkys, A. and Grazulis, S. (2021). Validation of the Crystallography Open Database using the Crystallographic Information Framework. Journal of Applied Crystallography, 54(2):661–672. https://doi.org/10.1107/S1600576720016532
[16] Altomare, A.; Corriero, N.; Cuocci, C.; Falcicchio, A.; Moliterni, A. and Rizzi, R. (2015). QUALX2.0: A qualitative phase analysis software using the freely available database POW-COD. Journal of Applied Crystallography, 48:598–603. https://doi.org/10.1107/S1600576715002319
[17] Alsada, A.S.A.and Alias, M. F. A. (2021). Impact of CNT Concentrations on Structural, Morphological and Optical Properties of ZnO: CNT Nano composite Films. Journal of Physics: Conference Series, 2114:1–11. https://doi.org/10.1088/1742-6596/2114/1/012020
[18] Barthwal, S.; Singh, B.; Barthwal, S. and Singh, N.B. (2018). ZnO-CNT Nanocomposite Based Gas Sensors—An Overview. Sensor Letters, 15(12):1–15. https://doi.org/10.1166/sl.2017.3912