Fabrication of Stirling Engine and study its characteristics

Article Sidebar

pdf
Published: Aug 8, 2018
DOI: https://doi.org/10.25130/tjps.v23i8.549
Keywords:
thermal engine, stirling cycle, stirling engine, gamma stirling engine, engine performance

Main Article Content

Yaseen H. Mahmood
Hayder M. Abed

Abstract

Gama Stirling engine was designed and manufactured using low cost materials, which operates on Stirling cycle. Air was used as a working fluid, the engine can be heated by any fuel. This Study showed the properties of the engine, the efficiency dependent on temperature and pressure , the maximum rpm of engine is 900 . These engines can be used to generate power in rural areas that have not completed the required energy that is powered by conventional fuels.

Article Details

How to Cite
Yaseen H. Mahmood, & Hayder M. Abed. (2018). Fabrication of Stirling Engine and study its characteristics. Tikrit Journal of Pure Science, 23(8), 96–100. https://doi.org/10.25130/tjps.v23i8.549
Issue
Vol. 23 No. 8 (2018)
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.

References

[1] Abbas, M.; Said, N. and Boumeddane, B. (2008). Thermal analysis of Stirling engine solar driven. Revue des Energies Renouvelables, 11 (4):503–514.

[2] kumar, A. (2014). Design and Testing of Solar Powered Stirling Engine. International Journal of Engineering Research and General Science, 2 (3):2091-2730.

[3] Gehlot, V.; Nigam, A.; Marmat, K. (2014). Development and fabrication of Alpha Stirling Engine . IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) , 11 (6):69-71.

[4] Maheswaran, K.G. ; Ahamed, M.A.; Karthikeyan, N.T. and Balachander, R. (2017). design and manufacture of beta stirling engine .International Journal of Innovative Research in Science, Engineering and Technology, 6 (7):174-182.

[5] Chen, C.Li. (2012). Performance Analysis and Optimization of a Solar Powered Stirling Engine with Heat Transfer Considerations. Energies, 5 (4):3573-3585.

[6] García, A. F.; Zarza, E.; Valenzuela, L., and Pérez ,M. (2010). Parabolic-trough solar collectors and their applications. Renewable and Sustainable Energy Reviews, 14 (3):1695–1721.

[7] Jaśkiewicz, M. (2013). Proposal of the new concept of the Stirling engine. Scientific Journals Zeszyty Naukowe, 35 (107):32–37.

[8] Ulloa, C. (2013). Application Model for a Stirling Engine Micro-Generation System in Caravans in Different European Locations . Energies, 6 (2):717-732.

[9] Kaddour, A . and Benyoucef, B. (2012). Simulation of Dish Stirling Solar Concentrator by Greenius Software . Journal of Electrical & Electronic Systems, 1 (3).

[10] Dinesh. K; Gowtham. Raj.R.; Naresh,M.; Rakesh, N.and Sriram, R. (2014). Design And Fabrication Of Low Cost Stirling Engine For Low Duty Industrial Applications. international journal of scientific & technology research, 3( 3):75-78.

[11] Lemaire, L.L. (2012). miniaturized stirling engines for waste heat recovery. M.Sc. thesis of Engineering McGill University Montréal, Canada.

[12] Pate, R. (2014). Solar Powered Stirling Engine- A New Hope, gjra- global journal for research analysis X 61 , 3 (10):2277–8160.

[13] Kumar, D V. (2014). modification of an alpha stirling engine with an venture based working fluid control system to promote its automotive applications. International Journal of Mechanical Engineering Mech. Eng. & Rob. Res, 3 (2):101-113.

[14] Rupesh, P. L.; Thamaraikannan, M. and Raja, K. (2017). design and fabrication of a vertical gamma type stirling engine–a conceptual prototype. International Journal of Mechanical Engineering and Technology (IJMET), 8 (10):410–417.

[15] Toughian, M. (2014). Performance Analysis of a Stirling Engine Heated by Two Individual Heat Sources (Solar and Fossil Fuel) . M.Sc. thesis of Science in Mechanical Engineering of Eastern Mediterranean University.

[16] Gheith, R. (2012). Study of the regenerator constituting material influence on a gamma type Stirling engine . Journal of Mechanical Science and Technology, 26 (4):1251-1255.

[17] Prajapati, H.; Vadher, R. (2015). Solar Stirling Engine. International Journal of Engineering Science and Research Technology, 4 (10):138-142.

[18 Lloyd, C.C. (2009). A low temperature differential stirling engine for power generation. M.Sc. thesis of Engineering in the Canterbury University.

[19] Yunus, M. (2016). Design, Manufacture and Measurements of Beta-Type Stirling Engine with Rhombic Drive Mechanism. Modern Mechanical Engineering, 6 (4):113-128.

[20] Yusof, I.M. (2009). Design, fabrication and Testing of a swirl Burner for Alpha V-shaped Stirling engine. Asia Journal of applied sciences, 2 (6):475,485.

[21] Bumataria, R.K. (2015). Performance Characteristic prediction of Allison and GPU-3 Stirling Engine Using Mathematical Model. International Journal of Advance Engineering and Research Development, 2 (2):248-255.