Design and fabrication of Solar dish array and study it characterization
Article Sidebar
Main Article Content
Abstract
Designed and fabricated a (3.25m) solar dish array ,by using (52) plane mirror. These mirrors are level and fixed to reflect the radiation in one area (focus) and after distance (1.5 m). In addition, it was found that the heat concentration (217.79 W) the useful energy (1416.125W) and the center efficiency were55% at (400-700W/m2). The solar dish array is relatively suitable for solar thermal applications.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.
References
[1] Nuwayhid, “The Realization of a Simple Solar
Tracking Concentrator for University Research
Applications.” Renewable Energy 24 (2): 207-222,
2001.
[2] A.R. El Ouederni," Experimental study of a
parabolic solar concentrator", Revue des Energies
Renouvelables Vol. 12 No.3 p. 395 – 404, (2009) .
[3] Sasa pavloic ,"Spasic development of
mathematical model of offset type solar parabolic
concentration collector ", Annals of Faculty
Engineering Hunedoara – International Journal of
Engineering Tome XIV 2016– Fascicule 1 [February]
ISSN: 1584-2665 [print; online] ISSN: 1584-2673 .
[4] L. F. Li, A. Kecskemethy, A. F. M. Arif, S.
Dubowsky, A novel approach for designing parabolic
mirrors using optimized compliant bands, ASME
2011 IDETC, August 28-30, Washington D. C.
[5] K. Lovegrove, G. Burgess, J. Pye, A new 500 m2
paraboloidal dish solar concentrator, Sol. Eng. 85
(2011) .
[6] Jorge Alexander "Design and construction of a
solar collector parabolic dish for rural zones in
Colombia" DOI:
http:/dx.doi.org/10.18180/tecciencia.2013.
[7]Ann George John," Design and simulation of
parabolic dish collector for hot water generation ",
journal of current International engineering and
scientific research (IJCESR) system ,p. 2393-8374,
(ONLINE): 2394-0697, volum-2 -9, 2015.
[8] Yaseen. H. Mahmood," Modulating a Solar
Parabolic Dish to Produce Boiled Water",Journal of
Environmental Science and Engineering A 4 (2015)
225-232
[9] Vanita Thakkar," Performance Analysis
Methodology for Parabolic Dish Solar Concentrators
for Process Heating Using Thermic Fluid",IOSR
Journal of Mechanical and Civil Engineering (IOSRJMCE)
e-ISSN: 2278-1684,p-ISSN: 2320-334X,
Volume 12, Issue 1 Ver. II (Jan- Feb. 2015), PP 101-
114.
[10] Ana C. Ferreira," design Optimization of a Solar
Dish8.. Collector for Its Application With Stirling
Engines", ASME 2015 International Mechanical
Engineering Congress and Exposition, Volume 6A:
Energy. Houston, Texas, USA, November 13–19,
2015.
[11] William B. Stine and Michael Geyer" Power
From The Sun"
http://www.powerfromthesun.net/book.html 2001.
[12] Duffie JA, Beckman WA. Solar engineering of
thermal process. John Wiley & Sons Inc; 1991.
[13] C. CHRISTOPHER NEWTON, "A concentrated
solar thermal energy system"A Thesis of THE Florida
state university famu-fsu college of engineering ,
December 14, 2006.