Study of the optical proprieties of copper oxide nanoparticles prepared by PLD method
Article Sidebar
Main Article Content
Abstract
Nano CuO thin films on glass substrates were prepared at a constant temperature of (300°C), by pulsed laser deposition (PLD) using Nd:YAG laser at 1064 nm wavelength and five deposition energies (400, 500, 600, 700 and 800 mJ) with fixed pulses (300 pulse and 6 Hz) was used on the properties of CuO films. CuO nanoparticles were deposited on glass substrates to study optical properties and formed thin films of thickness (200 nm).CuO thin flims were characterized by X-ray diffraction (XRD) measurements have shown that the polycrystalline CuO prepared at laser energies , includes optical transmittance and absorption measurements and energy gap of these films.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.
References
[1] Abdul Qader, D.F.; Zainab, N.J. and Raid, A.I. (2013). Synthesis of Colloidal Copper Oxide Nano particles using Pulsed Nd: YAG Laser Ablation in Liquid. Engineering. &Technology., 31, (1): 14-23
[2] Rashed, S.N. (2016). Comparison Study of The Effect of Thermal Annealing and CO2 Laser Annealing on Structural and Optical Properties of Thin Films Prepared by Sol-Gel Method. M.Sc. thesis, Tikrit University, Tikrit, Iraq:78
[3] Fakralden, D.J.; Hamed, S. A. and Abdul-Allah, M.H. (2011). Influence of Irradiation on Electronic Transition of (CuO) Films Prepared by Chemical Spray Paralysis Technique. Ibn Al- Haitham J. for pure & Application. Sciences. 24(1):1-6.
[4] Ammar, J. A.; Sabah, J.F. and Raad, M.S. (2017). Study optical and structural properties of copper oxide nanoparticles prepared by pulse laser ablation technology in (LC/MS) water. Kirkuk University Journal /Scientific Studies (KUJSS) ,12(1):17-29.
[5] Badawi R.S. (2014). The study of the factors affecting the transmission of the laser in the atmosphere. M.Sc. thesis, Tikrit University, Tikrit, Iraq:45
[6] Mohammed, M.A. (2010). Effect of Preparation Condition on the Structural and Optical Properties of TiO2 Thin Films Deposited by Pulsed Laser Technique. M.Sc. thesis, Babylon University , Babylon, Iraq:75
[7] Eman, M.N.; Iqbal, S.N. and Hanaa, I.M. (2016). Thickness and gamma-ray effect on physical properties of CdO thin films grown by pulsed laser deposition. Iraqi Journal of Physics, 14(29): 90-100.
[8] Othman, F.A. (2014). Ultra violet radiation effects on the structural and optical properties of CdO thin films prepared by spray thermo-chemical method (CSP). M.Sc thesis, Tikrit University, Tikrit, Iraq:54
[9] Zahraa, H.H.; Farah, L.W. and Israa, H.H. (2016). Investigation of structural, optical and antibacterial effect of copper nanoparticles synthesis by photoreduction. World Scientific News, 40 : 1-11 .
[10] Seham, H.S.; Enas, Y.A. Esraa, A. A. and Aeshah, A.H. (2015). Study the Effect of Irradiation on Structural and Optical Properties of (CdO) Thin Films that Prepared by Spray Pyrolysis. Ibn Al-Haitham J. for Pure & Application. Sciences, 28(2): 41-51.