The Effect of Heat Treatment on The Magnetic Properties of The (Fe-Mn) Alloys Prepared by Powder Metallurgy Method
Article Sidebar
Main Article Content
Abstract
This research studied the magnetic series of (Fe1-xMnx) which included the preparation alloys with weight ratios (X=25,50,70,80) by using Powder technology method . This study aimed to determine the Magnetic properties through the magnetic hestress loop . Number of magnetic properties have been found such as Remained force (Br), Coerecive force (Hc), Magnetic Relative permeability (µr) , and Magnetic Susceptibility (χm) for all study Samples . This experimental results were found a ferromagnetic behavior and sensitive to the heat treatment , which shows rapidity changeable to the paramagnetic behavior with the increasing the temperature degrees . The suitable heat treatment degree determined to get magnetic properties through the magnetic manufacturing operations . The results were explained due to the motion relation of magnetic spins with temperature degrees of heat treatment.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.
References
1- J. Crangle, Magnetic Properties of Solid, Willmer Brothers Limited, London (2009) .
2- P.J. Brown and I.K. Jassim, J. Physique, C8, P307, (1988) .
3- F.James, Introduction to Material Science for Engineering 5nd edition , p.570 , (2008) .
4- D. Hadfield , Permanent Magnet and Magnetism , 1st edition , London (2005) .
5- M. Kadziolka , W. Zarek and E. Popiel , Journal of Physics, Conference Series , 217 (2010) .
6- S. Rengara and S. Hee , Finland . J. Nanoscience , Voll 1 , P561 (2011) .
7- E-mail : R.Clarke@surrey.ac.uk Lsat modified : 2008 May 10th .
8- M.V. Schifagarde, I.A. Abrikosov and B. Johansson, Origin of the Invar Effect in Fe-Ni Alloys Nature, Vol.400, P.46, (1999) .
9- E. Xiang, Y. O. Shah and Z. Zhou, Electron, Mater, Lett, Vol.2, V Substtuted Co-Ni-Fe, Structural , Morphological and Electrical Properties, (2015) .
10- B.D. Culltiy, “Introduction to Magnetic Materials”, Addison – Wesley, London, ( 1972 ).